Our products
Product categories
Working pressure [bar]
Minimum operating temperature [Ā°C]
Maximum operating temperature [Ā°C]
Material
Vacuum resistance
Standard length [m]
- Available on request
ÅÄ cznik 90Ā° do wÄża z tworzywa PP, PVDF, seria 1D typ EM
All products | Low-pressure fittings and adaptersFrom: 589 kr / m / pcs
Available on order90Ā° connector for hose series 1D type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. It is designed for flexible PFA hoses, which require thermal expansion of the ends for installation (so-called flared connection). This solution guarantees no particle deposition, accumulation of bacteria, and elimination of medium leakage. Material: polypropylene, PVDF. Working pressure: 10 bar. 
Select options This product has multiple variants. The options may be chosen on the product page / Details90Ā° connector for hose series 2N type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Designed for rigid hoses and tubes made of fluoropolymers PTFE, FEP, PFA, glass and metal tubes, polyamide (PA) tubes, and polyethylene (PE) tubes. Hose/tube locking in the connector occurs via a locking ring and nut. Sealing of the connection is ensured by a PTFE ring. This solution eliminates the reduction of hose diameter, which consequently does not affect the flow of media. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.- Available on request90Ā° connector for LAUX lever coupling 42 socket-plug with wide applications, e.g.: for the transport and unloading of bulk materials (grains, flours, feeds, granules, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. When selecting a connector for a medium other than water, attention should be paid to the correct selection of gasket material. The standard sealing is an EPDM gasket. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: from -50Ā°C to +120Ā°C.
- Available on requestANFOR 90Ā° connector socket with "tail" for hose use, among others, in agriculture, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: galvanized steel. Sealing: NR/SBR rubber. Working pressure: from 5 bar to 19 bar (depending on the size of the connection). Operating temperature: from -20Ā°C to +50Ā°C.
- Available on requestANFOR connector socket - plug for use in agricultural farms, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage disposal, environmental protection. Material: galvanized steel. Sealing: NR/SBR rubber. Working pressure: from 5 bar to 19 bar (depending on the size of the connector). Operating temperature: from -20Ā°C to +50Ā°C.
- Available on requestANFOR connector plug with "tail" for hose use, among others, in agriculture, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: galvanized steel. Working pressure: from 5 bar to 19 bar (depending on the size of the connector). Operating temperature: from -20Ā°C to +50Ā°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe reducing connector allows the connection of two fittings or a fitting with an adapter. A nut is required on one side, without rings (sealing occurs on the cone), while on the other side a complete set is required - a nut and rings. The permissible working pressure is determined based on the outer diameter and wall thickness of the tube (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSKV socket connector for use in hydraulic systems. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsL-type corner connector with internal thread enabling the connection of quick couplings and UHP hoses. Material: carbon steel, black galvanized. Working pressure: 700 bar (with a safety factor of 4), 1000 bar (with a safety factor of 2.8).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsL-type corner connector with internal thread enabling the connection of quick couplings and UHP hoses. Working pressure: from 2000 bar to 3000 bar (depending on thread size). Material: carbon steel, black galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90Ā° angle connector BURGACLIP for hose type 3090 for air conditioning. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 3000 flange connector designed to connect two flanges with grooves and O-rings. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector with internal thread enabling the connection of quick couplings and UHP hoses. Working pressure: from 2000 bar to 3000 bar (depending on thread size). Material: carbon steel, black galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for hose series 1B type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Installation is done by pushing the hose onto the integrated connecting sleeve, and locking occurs using a knurled nut that tightens the flexible hose onto the connecting sleeve. Multiple installations are possible. It is designed for flexible hoses made of materials (PVC, silicone) reinforced with a specific wall thickness. The end withstands short pressure spikes up to 30 bar at a temperature of +20Ā°C. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Available on request
Straight connector for PP, PVDF plastic hose, 1D series type EM
All products | Low-pressure fittings and adaptersFrom: 589 kr / m / pcs
Available on orderStraight connector for hose series 1D type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. It is designed for flexible PFA hoses, which require thermal expansion of the ends for installation (so-called flared connection). This solution guarantees no particle deposition, accumulation of bacteria, and elimination of medium leakage. Material: polypropylene, PVDF. Working pressure: 10 bar. - Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for air conditioning hose type 3356 and 3090. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for thick-walled hoses for air conditioning type 3055 and 3056. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight reducing connector for hose, type NA. Intended for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
- Available on requestReduction connector of LAUX lever coupling 42 socket-plug with wide application, e.g.: for the transport and unloading of bulk materials (grains, flours, feeds, granulates, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. When selecting a coupling for a medium other than water, attention should be paid to the correct selection of seal material. The standard sealing is an EPDM gasket. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: from -50Ā°C to +120Ā°C.
- Available on requestReduction connector of LAUX lever coupling 42 socket-plug with wide application, e.g.: for the transport and unloading of bulk materials (grains, flours, feeds, granulates, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. When selecting a coupling for a medium other than water, attention should be paid to the correct selection of seal material. The standard sealing is an EPDM gasket. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: from -50Ā°C to +120Ā°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTriangular connector for hose series 1B type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Installation is done by pushing the hose onto the integrated connecting sleeve, and locking occurs using a knurled nut that clamps the flexible hose onto the connecting sleeve. Multiple installations are possible. It is designed for flexible hoses made of materials (PVC, silicone) reinforced with a specific wall thickness. The end withstands short pressure spikes up to 30 bar at a temperature of +20Ā°C. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Available on requestConnector for LAUX lever coupling 42 socket-socket with wide applications, e.g.: for the transport and unloading of bulk materials (grains, flours, feeds, granulates, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. When selecting a coupling for a medium other than water, attention should be paid to the correct selection of gasket material. The standard sealing is an EPDM gasket. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Tightness under vacuum. Operating temperature: from -50Ā°C to +120Ā°C.
- Available on requestConnector of LAUX 42 lever coupling plug-plug with wide applications, e.g.: for the transfer and unloading of bulk materials (grains, flours, feeds, granulates, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. When selecting a coupling for a medium other than water, attention should be paid to the correct selection of seal material. The standard sealing is an EPDM gasket. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Tightness under vacuum. Operating temperature: from -50Ā°C to +120Ā°C.
- Available on requestStorz corrugated connector for hoses. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsChassis washing lance. Due to its length and bent tip, it is ideal for washing chassis as well as other hard-to-reach areas. The outlet part of the lance is finished with a 1/4" NPT internal thread. Working pressure: up to 280 bar. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMT2 type lance with thermal insulation intended for high-pressure washer. Connections: (inlet) GW M22x1.5 / (outlet) GZ M18x1.5. Working pressure: up to 250 bar. Flow rate: 40 l/min. Operating temperature: up to +150Ā°C. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMT3 type thermal insulation lance intended for high-pressure washer. Connection: (inlet) GZ 1/4" BSP / (outlet) GW 1/4" NPT. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150Ā°C. Material: stainless steel.
- Available on request
Lance for high-pressure cleaner, inlet GZ 1/4″ BSP, galvanized steel, type MT1
All products | Guns for high-pressure washersFrom: 100 kr / m / pcs
Available on orderMT1 type thermal insulation lance intended for high-pressure washer. Connections: (inlet) GZ 1/4" BSP / (outlet) GW 1/4" NPT. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150Ā°C. Material: galvanized steel. - Available on request
Lance for high-pressure cleaner, inlet GZ M22x1.5, galvanized steel, type MT6
All products | Guns for high-pressure washersFrom: 255 kr / m / pcs
Available on orderMT6 type lance with handle intended for high-pressure washer. Connection: (inlet) GZ M22x1.5 / (outlet) GW 1/4" NPT. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150Ā°C. Material: galvanized steel. - Available on request
Foam lance, 2 x GW BSP, stainless steel
All products | Foam- washing- and dosing devicesFrom: 300 kr / m / pcs
Available on orderFoam lance with internal BSP thread on both ends, without nozzle, for mounting, e.g., with a water gun (with external thread at the outlet). Connection: (inlet) 1/2" BSP male / (outlet) 1/2" BSP male. Available lengths: 22 cm and 50 cm. Material: stainless steel. - Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble straight lance with a handle for holding, designed for high-pressure washers. Available in diameters of 1/8" and 1/4". Connections: (inlet) GZ M22x1.5 / (outlet) GW 1/4" NPT. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150Ā°C. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble straight lance with a handle for holding, designed for high-pressure washers. Available in diameters of 1/8" and 1/4". Connections: (inlet) GZ M22x1.5 / (outlet) GW 1/4" NPT. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150Ā°C. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble bent lance with a knob designed for a high-pressure washer. Connections: (inlet) GZ M22x1.5 / (outlet) GW 1/4" NPT. Available in diameters of 1/8" and 1/4". Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150Ā°C. Material: stainless steel.
- Available on request
Extension lance 325 mm, for pressure washer gun, stainless steel
All products | Guns for high-pressure washersFrom: 129 kr / m / pcs
Available on orderExtended lance with thermal insulation, designed for high-pressure washer. Length: 325 mm. Connections: (inlet) GZ 1/4" BSP / (outlet) GZ 1/4" BSP. Working pressure: up to 250 bar. Permissible pressure: 280 bar. Flow rate: 45 l/min. Operating temperature: up to +160Ā°C. Material: stainless steel. - Available on request
Extension lance 325 mm, for high-pressure cleaner gun, galvanized steel
All products | Guns for high-pressure washersFrom: 107 kr / m / pcs
Available on orderThermal insulated extension lance, designed for high-pressure washer. Length: 325 mm. Connections: (inlet) GZ 1/4" BSP / (outlet) GZ 1/4" BSP. Working pressure: up to 250 bar. Maximum pressure: 280 bar. Flow rate: 45 l/min. Operating temperature: up to +160Ā°C. Material: galvanized steel. - Available on requestThermal insulated extension lance, designed for high-pressure washer. Length: 375 mm. Connections: (inlet) GZ 1/4" BSP / (outlet) GW M22x1.5. Working pressure: up to 250 bar. Maximum pressure: 280 bar. Flow rate: 45 l/min. Operating temperature: up to +160Ā°C. Material: galvanized steel.
- Available on request
Vented extension lance with nozzle guard, for high-pressure washer gun, galvanized steel
All products | Guns for high-pressure washersFrom: 290 kr / m / pcs
Available on orderVentilated extension lance with nozzle protection, designed for high-pressure washer. Connections: (inlet) GZ 1/4" BSP / (outlet) GW 1/4" NPT. Working pressure: up to 250 bar. Maximum pressure: 280 bar. Flow rate: 45 l/min. Operating temperature: up to +160Ā°C. Material: galvanized steel. - Available on request
Bent lance with foam nozzle with quick coupler for multifunction gun, stainless steel, LANFC
All products | Foam- washing- and dosing devicesFrom: 1 031 kr / m / pcs
Available on orderBent lance with standard nylon foam nozzle with quick-connect brass socket for connection to multifunctional gun. Available lengths: 30 cm, 60 cm, and 90 cm. Material: stainless steel (lance). - Available on request
Bent lance with spray nozzle with quick coupler for multifunction gun, stainless steel, LARC
All products | Foam- washing- and dosing devicesFrom: 757 kr / m / pcs
Available on orderLance with a nozzle in a shield for spraying with a quick connector for connection to a multifunctional AKBO gun. Available lengths: 30 cm, 60 cm, 90 cm, and 200 cm. 200 cm lance is telescopic. Material: stainless steel. - Available on request
Bendable lance for high-pressure washer, GW inlet 1/4″ BSP, stainless steel, type ST-85
All products | Guns for high-pressure washersFrom: 1 461 kr / m / pcs
Available on orderBending lance type ST-85 designed for high-pressure washer. Smooth adjustment of the bending angle of the lance from 20Ā° to 140Ā° allows for cleaning hard-to-reach surfaces such as vehicle undercarriages and roofs, tanks, etc. Connections: (inlet) 1/4" BSP male / (outlet) 1/4" NPT male. Working pressure: up to 210 bar. Operating temperature: up to +150Ā°C. Material: stainless steel.
