Our products
Product categories
Working pressure [bar]
Minimum operating temperature [Ā°C]
Maximum operating temperature [Ā°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass hose end, NiTO type A with internal BSP thread and flat sealing, universal, knurled nut. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80Ā°C.- Available on request
BSPT male threaded end, AISI 304 steel, CNPH HEAVY DUTY type
All products | Low-pressure fittings and adaptersFrom: 1 126 kr / m / pcs
Available on orderCNPH HEAVY DUTY end fitting with external tapered BSPT thread made of AISI 304 steel with a "tail" for high-strength hoses. Designed for rubber and plastic industrial hoses. Installation using special CNFH type clamping sleeve. Material: AISI 304 steel. - Available on request
BSPT male threaded end, carbon steel, CNPH HEAVY DUTY type
All products | Low-pressure fittings and adaptersFrom: 268 kr / m / pcs
Available on orderCNPH HEAVY DUTY end fitting with external tapered BSPT thread made of galvanized steel with a "tail" for high-strength hoses. Designed for rubber and plastic industrial hoses. Installation using special CNFH type clamping sleeve. Material: carbon steel, galvanized. - Available on request
Metric male threaded end, 24Ā° taper, carbon steel, type SA
All products | Low-pressure fittings and adaptersFrom: 25 kr / m / pcs
Available on orderSA type end fitting with external metric thread, 24Ā° cone sealing, designed for low-pressure rubber and non-reinforced and textile-reinforced plastic hoses, with external steel braid. Commonly used in flexible hoses for sanitary fittings, fuel systems, air systems, etc. Material: carbon steel, galvanized. - Select options This product has multiple variants. The options may be chosen on the product page / DetailsSA type end with external metric thread, 60Ā° cone sealing, designed for low-pressure rubber and non-reinforced and textile-reinforced plastic hoses, with external steel braid. Commonly used in flexible hoses for sanitary fittings, fuel systems, air systems, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCNP type end with external tapered NPT thread made of galvanized steel with a "tail" for hose. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type clamping sleeves. Material: AISI 316 steel.
- Available on request
NPT male threaded end, carbon steel, type CNP
All products | Low-pressure fittings and adaptersFrom: 84 kr / m / pcs
Available on orderCNP type end with external tapered NPT thread made of galvanized steel with a "tail" for hose. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type clamping sleeves. Material: carbon steel, galvanized. - Available on requestAK end with external BSP thread and anti-kink spring, 200 mm in length. Designed for installation in industrial hoses, particularly in washing hoses at the connection point with the water gun, where bending of the hose is required due to the operation of the gun. The spring provides additional protection for the hose. Material: AISI 316 steel. Working pressure: up to 40 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternal threaded end UNF, with socket, for air conditioning hose type 3356 and 3090. Material: steel.
- Available on request
Swivel nut end with GW BSP, brass, type EW
All products | Low-pressure fittings and adaptersFrom: 47 kr / m / pcs
Available on orderRotating nut end with internal BSP thread. Material: brass. Working pressure: 40 bar. Operating temperature: from -10Ā°C to +90Ā°C. - Select options This product has multiple variants. The options may be chosen on the product page / Details45Ā° crimped end with internal thread and nut, type FAG, for PTFE brake hoses. Material: carbon steel, chrome-plated.
- Available on request45Ā° crimped end with external thread and nut, MAG type, for PTFE brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO 90Ā° crimp fitting for PTFE brake hoses. Material: anodized aluminum.
- Available on requestBANJO 90Ā° crimp fitting for PTFE brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimping end for welding to Teflon brake hoses. Material: carbon steel.
- Available on requestCrimped end with internal thread and nut, type FAGP, for PTFE brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped end with external and internal thread, type MFALP, for Teflon brake hoses. Material: carbon steel, chrome-plated.
- Available on requestCrimped end with external thread and nut, type MAGP, for PTFE brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped end with external thread, type MALP, for Teflon brake hoses (seal external cone). Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd fitting with "tail" for a hose with a diameter of 6 mm, equipped with a special clamp that keeps the fitting in the correct position. Material: brass.
- Available on requestPlug (blind cap) with external BSP thread (sealing on external cone 120Ā°) intended for UHP installations (connection blocks). Material: black galvanized steel. Working pressure: 3000 bar.
- Available on request
Cap with GZ BSP, PVDF, 3F series
All products | Low-pressure fittings and adaptersFrom: 34 kr / m / pcs
Available on orderInternal threaded plug BSP, series 3F type EM. It has wide applications in laboratories, medicine, the pharmaceutical, chemical, and food industries. Supplied without a gasket. Material: polypropylene, polyvinylidene fluoride. Working pressure: 10 bar. - Select options This product has multiple variants. The options may be chosen on the product page / DetailsTrapezoidal external threaded plug compliant with DIN EN 12713 standard, fully compatible with the threads in IBC containers from various manufacturers. Material: polypropylene. Working pressure: up to 7 bar. Operating temperature: from -10Ā°C to +70Ā°C (temporarily up to +80Ā°C).
- Available on request
Walterscheidā¢ ROV plug, carbon steel
All products | Tube fittings for hydraulic pipesFrom: 28 kr / m / pcs
Available on orderDIN 2353 plug Eaton Walterscheidā¢, type ROV: 24Ā° DIN 2353 socket with external metric thread. Available as: L (light series), S (heavy series). Material: carbon steel, with Guardian Sealā¢ galvanic coating. - Available on request
Walterscheidā¢ VSTI-BE plug, carbon steel
All products | Tube fittings for hydraulic pipesFrom: 17 kr / m / pcs
Available on orderDIN 2353 plug Eaton Walterscheidā¢, type VSTI-BE for hexagon socket key: external BSP thread (sealing DIN 3852 type E ā elastomer gasket with rectangular cross-section). Safety factor 4:1. Available as: L (light series), S (heavy series). Material: carbon steel, with Guardian Sealā¢ galvanic coating. - Available on request
Walterscheidā¢ VSTI-ME plug, carbon steel
All products | Tube fittings for hydraulic pipesFrom: 21 kr / m / pcs
Available on orderDIN 2353 Eaton Walterscheidā¢ plug, type VSTI-ME for hexagon socket: external metric thread (sealing DIN 3852 type E ā elastomer gasket with rectangular cross-section). Safety factor 4:1. Available as: L (light series), S (heavy series). Material: carbon steel, with Guardian Sealā¢ galvanic coating. - Available on request
Filler cap with filter in AKW nut
All products | Other high-pressure accessoriesFrom: 226 kr / m / pcs
Available on orderComplete filler cap mounted at the top of the tank. Designed for pouring oil using a dispensing nozzle. The chamber made of steel mesh prevents dirt from entering the tank during filling. The cap contains a venting space with a filter, preventing contaminants from the air from entering the system during the suction of hydraulic oil. Available in two versions: C ā steel version, TPA ā polyamide version. Cap material: chrome-plated steel (type C), polyamide (type TPA). Mounting flange material: chrome-plated steel (type C); polyamide (type TPA). Filling chamber material: galvanized steel. Washer material: cork (type C), rubber (type TPA). Mounting screws: M5. - Select options This product has multiple variants. The options may be chosen on the product page / DetailsHex socket plug with hex key for stainless steel type 62315 with external BSP or metric thread, O-ring. Material: AISI 316L steel. Operating temperature: from -20Ā°C to +225Ā°C. Working pressure: 140 bar.
- Available on requestHex socket plug with external UNF thread and gasket, type 107HOB, for threaded couplings primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. Material: AISI 316 steel. Gasket: FKM 90 o-ring.
- Available on requestBanjo tee body connector with D6 type socket connections, designed for hoses made of soft plastics. The connection is made by fitting the hose onto the end and tightening with a nut. The Banjo tee body connector allows for positioning the connector in the desired orientation. Through bolts for the body: D7, D8, D9, D10. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBanjo tee body, type R14, for screws of series D, intended for connecting pipes and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20Ā°C to +80Ā°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBanjo tee body, type R29, for screws series D, intended for connecting pipes and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20Ā°C to +60Ā°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHansen Beverage quick coupling plug body with internal UNF thread. The couplings are available in two versions: for gases type HB-2KG... and for liquids type HB-2KL.... These versions are not interchangeable (different plug diameter), which prevents connection errors. Identifying the version is very easy. For gas couplings, the identification ring on the socket is white, and the hexagon on the plug has a notch. For liquid couplings, the identification ring on the socket is black, and the hexagon on the plug does not have a notch. Working pressure: 15 bar. Operating temperature: up to +130Ā°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector - "Y" type tee BURGACLIP for hose type 3090 for air conditioning. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsU connector designed for connecting Line On Line products. For 6 mm and 8 mm connectors. Material: polyamide.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee fitting for connecting hoses type NA. Designed for use in control systems, in installations for transporting gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
- Available on request45Ā° connector for LAUX lever coupling, socket-plug with wide applications, e.g.: for the transport and unloading of bulk materials (grains, flours, feeds, granulates, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. When selecting a coupling for a medium other than water, attention must be paid to the correct selection of seal material. The standard sealing is an EPDM gasket. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: from -50Ā°C to +120Ā°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90Ā° connector for rubber and soft plastic hoses (e.g., TYGONĀ® hoses, silicone hoses), widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Material: polypropylene, polyvinylidene fluoride, Teflon. Working pressure: 10 bar.
- Available on request
90Ā° connector for PP, PVDF plastic hose, series 1+ type EM
All products | Low-pressure fittings and adaptersFrom: 187 kr / m / pcs
Available on orderConnector for hose 90Ā° type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The design allows for multiple installations without the need for tools. It is intended for flexible smooth-walled unreinforced hoses made of PVC, PA, PUR, PTFE, PFA, FEP, FKM, silicone, and TYGONĀ® hoses. Material: polypropylene, PVDF. Working pressure: 16 bar. - Select options This product has multiple variants. The options may be chosen on the product page / Details90Ā° connector for metric plastic hoses series 1C type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. Installation is done by pushing the hose onto the integrated connecting sleeve. Locking occurs via a locking ring made of PEEK and a knurled nut. Sealing is provided by a sealing ring made of PTFE. It is intended for smooth-walled unreinforced hoses and tubes made from harder materials such as PTFE, PFA, FEP, PA, PE. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
