Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight double BANJO fitting type DRS, intended for low-pressure rubber and non-reinforced plastic hoses as well as those with textile reinforcement, with an external steel braid. Commonly used in flexible hoses for sanitary fittings, fuel installations, air systems, etc. Material: carbon steel, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO fitting with external BSP thread type AI 13550 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by crimping the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass. Seal: NBR. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSF type end fitting with flat sealing, intended for low-pressure rubber and non-reinforced and textile-reinforced plastic hoses, with an external steel braid. Commonly used in flexible hoses for sanitary fittings, fuel systems, air systems, etc. Use nut type UM (EC-105…). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass connector for flexible hoses. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight fitting with external BSP thread and flat gasket type AI 13485 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by compressing the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass. Gasket: NBR. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight tube end fitting type RST, without a nut, intended for low-pressure rubber and non-reinforced and textile-reinforced plastic hoses, with an external steel braid. Commonly used in flexible conduits for sanitary fittings, fuel systems, air systems, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass screw connector for hoses NiTO type A with BSP thread and flat sealing. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector - "T" fitting with external BSPT thread type AI 13220 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by crimping the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Available on request
Hose coupling, brass, type EW
All products | Low-pressure fittings and adaptersFrom: 19 kr / m / pcs
Available on orderStraight connector for hoses. Material: brass. Working pressure: 40 bar. Operating temperature: from -10°C to +90°C. - Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight tube connector with hose end type AI 13540 designed for connecting copper pipes to a hose. The range of external diameters of connected pipes is from 6 to 14 mm. The tightness of the connection is achieved by crimping the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDHS type BANJO bolt with metric thread, with two holes. Material: carbon steel, galvanized.
- Available on request
Adaptor with metric male thread, carbon steel, type RDST
All products | Low-pressure fittings and adaptersFrom: 25 kr / m / pcs
Available on orderRDST type adapter with external metric thread, reducing, sealing cone 60°. Material: carbon steel, galvanized. - Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass connector (four-way) type AI 13510 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 14 mm. The tightness of the connection is achieved by compressing the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-connector for hose, type NA. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket for NITO end with internal thread type A.
- Available on request
BANJO double end to be soldered, carbon steel, type DRL
All products | Low-pressure fittings and adaptersFrom: 55 kr / m / pcs
Available on orderDRL type double BANJO end for soldering. Material: carbon steel. 
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for hose, type NA. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDST type adapter with external metric thread, 60° cone sealing. Material: carbon steel, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsY-branch connector for hose, type NA. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angle connector for hose, type NA. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
- Available on request
T-piece, carbon steel, type TSM
All products | Low-pressure fittings and adaptersFrom: 66 kr / m / pcs
Available on orderTSM type tee fitting designed for low-pressure rubber and non-reinforced and textile-reinforced plastic hoses, with an external steel braid. Commonly used in flexible hoses for sanitary fittings, fuel systems, air systems, etc. Material: carbon steel, galvanized. - Available on request
BANJO angle end 90°, carbon steel, type RBR
All products | Low-pressure fittings and adaptersFrom: 117 kr / m / pcs
Available on order90° angled BANJO fitting type RBR, designed for low-pressure rubber and non-reinforced and textile-reinforced plastic hoses, with an external steel braid. Commonly used in flexible lines for sanitary fittings, fuel systems, air systems, etc. Material: carbon steel, galvanized. 
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight hose end, type NA with external BSPT and metric thread. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: polyamide (PA6).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight hose fitting with GZ BSP, type EM, finds wide application in laboratories, medicine, the pharmaceutical, chemical, and food industries. The design allows for multiple installations without the need for tools. It is intended for flexible smooth-walled unreinforced hoses made of PVC, PA, PUR, PTFE, PFA, FEP, FKM, silicone, and TYGON® hoses. Material: polypropylene, PVDF. Working pressure: 16 bar.
- Available on request
90° angle tube end, carbon steel, type RBS
All products | Low-pressure fittings and adaptersFrom: 25 kr / m / pcs
Available on order90° angled tube end fitting type RBS, without a nut, designed for low-pressure rubber and non-reinforced and textile-reinforced plastic hoses, with an external steel braid. Commonly used in flexible conduits for sanitary fittings, fuel systems, air systems, etc. Material: carbon steel, galvanized. - Select options This product has multiple variants. The options may be chosen on the product page / DetailsR-G type BANJO adapter with external metric or BSP thread, 60° cone sealing. Material: carbon steel, galvanized.
- Available on request
DIN 20034 hose end without nut, galvanized cast iron
All products | Low-pressure fittings and adaptersFrom: 79 kr / m / pcs
Available on orderConical end with "tail" for pneumatic hoses, without a protective flange. Material: galvanized cast iron. Working pressure: 16 bar. - Available on request
Nut DIN 8537/20033 with Rd thread, galvanized cast iron
All products | Low-pressure fittings and adaptersFrom: 73 kr / m / pcs
Available on orderDIN 8537/20033 nut with Rd thread intended for a tapered end with a "tail" for a hose. Material: galvanized cast iron. Working pressure: 16 bar. - Available on request
Adaptor DIN 20037 with BSP and Rd male thread, steel/galvanized cast iron
All products | Low-pressure fittings and adaptersFrom: 171 kr / m / pcs
Available on orderDIN 20037 adapter with external BSP and Rd thread, for use in pneumatic installations. Material: steel/zinc-coated cast iron. Working pressure: 25 bar. - Available on request
Round hole suction filter with GW BSPT, carbon steel, type RH
All products | Low-pressure fittings and adaptersFrom: 756 kr / m / pcs
Available on orderCylindrical filter with round openings with BSPT thread for use with hoses for drawing water, sewage, emptying tanks, etc. Material: carbon steel, galvanized. - Available on request
Round hole suction filter with hose end, carbon steel, type RD
All products | Low-pressure fittings and adaptersFrom: 696 kr / m / pcs
Available on orderCylindrical filter with round holes with a "tail" for hose application in water, sewage, and tank emptying hoses, etc. Material: carbon steel, galvanized. - Available on request
BANJO adapter with metric male thread, carbon steel, type R-G-L
All products | Low-pressure fittings and adaptersFrom: 123 kr / m / pcs
Available on orderR-G-L type BANJO adapter with external metric thread, 24° cone sealing. Material: carbon steel, galvanized. - Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter for connections to copper, brass, steel, aluminum pipes, etc., as well as plastic (e.g., polyamide) pipes and hoses with external BSP thread, with a seal. Standard: EN 1254-2. Material: brass. Seal: NBR. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThreaded four-way connector with internal BSP threads, series 3F type EM. It has wide applications in laboratories, medicine, pharmaceutical, chemical, and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThreaded four-way coupling with external BSP threads, series 3F type EM. It has wide applications in laboratories, medicine, pharmaceutical, chemical, and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Available on request
Suction filter with holes on top with GW BSPT, AISI 304 steel, type SKTH
All products | Low-pressure fittings and adaptersFrom: 2 525 kr / m / pcs
Available on orderCone filter with openings at the top with BSPT thread for use with hoses for drawing water, sewage, emptying tanks, etc. Material: AISI 304 steel. - Select options This product has multiple variants. The options may be chosen on the product page / Details90o elbow with internal BSP thread, series 3F type EM, has wide applications in laboratories, medicine, pharmaceutical, chemical, and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90o elbow with external and internal BSP thread, series 3F type EM, has wide applications in laboratories, medicine, pharmaceutical, chemical, and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngle nipple 90o with external BSP thread, series 3F type EM, has wide applications in laboratories, medicine, pharmaceutical, chemical, and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFixed flange PN16 type CNWF made of carbon steel with a "tail" for hoses. Designed for rubber and plastic industrial hoses. Installation using straps or clamp bands. Material: carbon steel, galvanized.
