Our products
Product categories
Working pressure [bar]
Minimum operating temperature [Ā°C]
Maximum operating temperature [Ā°C]
Material
Vacuum resistance
Standard length [m]
- Available on request
TE-NT screw connection tee, stainless steel
All products | Tube fittings for hydraulic pipesFrom: 225 kr / m / pcs
Available on orderDIN 2353 screw-in tee fitting, type TE-NT: 24Ā° DIN 2353 socket with external metric thread and external NPT thread (seal on the thread ā with Teflon tape or anaerobic sealant). Safety factor 2.5:1. Available as: L (light series), S (heavy series). Material: AISI 316 steel. 
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 screw-in tee fitting, type TE-NT: 24Ā° DIN 2353 socket with external metric thread and external NPT thread (seal on the thread ā with Teflon tape or anaerobic sealant). Safety factor 2.5:1. Available as: L (light series), S (heavy series). Material: carbon steel, galvanized.- Available on request
Walterscheidā¢ GE-BT screw connection, carbon steel
All products | Tube fittings for hydraulic pipesFrom: 9 kr / m / pcs
Available on orderDIN 2353 Eaton Walterscheidā¢ screw connection, type GE-BT: 24Ā° DIN 2353 socket with external metric thread and BSPT external thread (seal on the thread ā with Teflon tape or anaerobic sealant). Safety factor 2.5:1. Available as: LL (very light series), L (light series), S (heavy series). Material: carbon steel, with Guardian Sealā¢ galvanic coating. - Available on request
Walterscheidā¢ GE-NT screw connection, carbon steel
All products | Tube fittings for hydraulic pipesFrom: 11 kr / m / pcs
Available on orderDIN 2353 Eaton Walterscheidā¢ screw connection, type GE-NT: 24Ā° DIN 2353 socket with external metric thread and external NPT thread (seal on the thread ā with Teflon tape or anaerobic sealant). Safety factor 2.5:1. Available as: LL (very light series), L (light series), S (heavy series). Material: carbon steel, with Guardian Sealā¢ galvanic coating. - Available on request
Walterscheidā¢ GE-UN screw connection, carbon steel
All products | Tube fittings for hydraulic pipesFrom: 113 kr / m / pcs
Available on orderDIN 2353 Eaton Walterscheidā¢ screw connection, type GE-UN: 24Ā° DIN 2353 socket with external metric thread and external UNF thread (sealed with an O-ring). Safety factor 4:1. Available as: L (light series), S (heavy series). Material: carbon steel, with Guardian Sealā¢ galvanic coating. - Available on request
Walterscheidā¢ RI-BE screw connection, carbon steel
All products | Tube fittings for hydraulic pipesFrom: 26 kr / m / pcs
Available on orderDIN 2353 Eaton Walterscheidā¢ screw connection, type RI-BE with external BSP thread (sealing DIN 3852 type E ā elastomer gasket with rectangular cross-section) and internal BSP thread (thread sealing). Available as: L (light series), S (heavy series). Material: carbon steel, with Guardian Sealā¢ galvanic coating. - Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug connector with locking nut SKV with external BSP thread (sealing DIN 3852 type E - elastomer gasket with rectangular cross-section) for use in hydraulic systems. Material: galvanized steel. Sealing: NBR.
- Available on requestSmall, lightweight, and handy tool for microperforating the outer layer of hoses with a diameter of up to 2". It allows for very quick microperforation, especially in situations where access to the hose is limited. An ideal tool for thermoplastic hoses. Dimensions: 260x45x30 mm. Weight 0.6 kg.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass reduction (reduction, ring, nut) for use with couplings or fittings type AI 13000 (external diameter range of connected pipes from 4 to 12 mm). The tightness of the connection is achieved by compressing the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using the nut. Standard: EN 1254-2. Material: brass.
- Available on request
Manometric reduction nipple, stainless steel, type RDN
All products | Manometers, reducers, and valvesFrom: 389 kr / m / pcs
Available on orderInternal and external threaded nipple for pressure gauges with standard pressure connection according to EN 837-1. Allows the installation of a pressure gauge to a larger size socket. The pressure gauge is mounted to the internal thread d1. This connection is self-sealing ā the cone at the bottom of the hole d1 presses into the centering hole of the pressure gauge connection. Threads d1 and d2 are secured against loosening of the connection by a special adhesive. Designed for non-aggressive liquids and gases, for the installation of pressure gauges, taps, and pressure valves, as well as other accessories equipped with this type of connection. Material: AISI 316Ti steel. - Available on requestReducing coupling with external BSP thread and internal BSP thread intended for cold and hot water. Material: chrome-plated brass. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducer for quick couplings for water NiTO with external threads. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80Ā°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducer for quick couplings for water NiTO with external and internal thread. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80Ā°C.
- Available on requestAir pressure regulator with a factory-set output pressure of 6 bar (the set pressure cannot be changed). Designed for direct attachment to pneumatic tools. The pressure regulator enhances work safety: it protects the operator and the tools by preventing pressure spikes; it ensures optimal performance of the pneumatic tool by providing a constant, pre-set pressure; it reduces excessive consumption of compressed air. Lightweight, compact size and compatible with all available pneumatic tools. Minimum working pressure: 8 bar. Maximum working pressure: 16 bar. Material: aluminum. Weight: 41 g.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMembrane-type pressure reducing valve with an integrated pressure gauge in the knob, ideal for panel mounting. It features an atmospheric air vent. High accuracy in maintaining outlet pressure. Available components for panel mounting (EW-367K33). Material: zinc and aluminum alloy. Size: 3/8ā. Supply pressure: up to 25 bar. Operating temperature: from -10Ā°C to +90Ā°C. Connection: 3/8" BSP female thread. Flow rate 1000 l/min (at an inlet pressure of 8 bar and Īp = 1 bar).
- Available on requestMonoblock sliding valve YFM120 controlled by manual levers with centering springs. Designed for hydraulic systems of cranes, lifts, construction machinery, agricultural machinery, etc. Standardly equipped with a safety valve (factory set to 180 bar) and type 1 sliders. Material: cast iron (body), hardened steel (sliders). Sealing: NBR. Maximum working pressure: 250 bar. Maximum return pressure: 50 bar. Operating temperature: from -20Ā°C to +80Ā°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElectricly controlled monoblock sliding valve distributor YE45 with centering springs. Designed for hydraulic systems of cranes, lifts, construction machinery, agricultural equipment, etc. Standardly equipped with a type C safety valve (factory set to 140 bar) and type 1 sliders. Material: cast iron (body), hardened steel (sliders). Sealing: NBR. Maximum working pressure: 250 bar. Maximum return pressure: 25 bar. Control voltage: 12V DC. Operating temperature: from -20Ā°C to +80Ā°C.
- Available on request
Angled air manifold 5xGW BSP with attachment, brass, type EW
All products | Fittings (pipes, fittings, and connectors)From: 579 kr / m / pcs
Available on orderAngle distributor with internal BSP threads for air distribution mounting. Material: brass. Working pressure: up to 63 bar. Operating temperature: from -10Ā°C to +90Ā°C. - Available on request
Straight air manifold 5xGW BSP with attachment, brass, type EW
All products | Fittings (pipes, fittings, and connectors)From: 463 kr / m / pcs
Available on orderSimple distributor with BSP internal threads for air distribution mounting. Material: brass. Working pressure: up to 63 bar. Operating temperature: from -10Ā°C to +90Ā°C. - Available on requestThe EWO air distributor allows for the installation of two or three shut-off valves, which can be closed individually as needed. It has two shut-off valves and two external threaded outlets equipped with fittings for 6 mm or 9 mm hoses. Mounting position - any. Body material: brass. Operating temperature: from -10Ā°C to +90Ā°C. Working pressure: 40 bar.
- Available on requestThe EWO air distributor allows for the installation of two or three shut-off valves, which can be closed individually as needed. It has two shut-off valves and two outlets with external threads. Mounting position - any. Body material: brass. Operating temperature: from -10Ā°C to +90Ā°C. Working pressure: 40 bar.
- Available on request
IMW industrial wipes
All products | Cleaning agents, maintenance products, assembly compounds, and protective coatingsAsk for price
Available on orderIMW industrial wipes effectively remove dirt, oil, grease, and tar. Ideal for cleaning hands, work surfaces, tools, etc. Packaging - tube of 40 pieces. - Available on requestDouble-acting actuator with magnet and damping ISO 15552 series 3. It features a special sleeve with minimized weight, made of anodized, calibrated aluminum, and two grooves for sensor mounting on a common plane with power supply ports. The remaining walls are smooth and easy to clean. The actuator cover is made of high-pressure aluminum casting. Piston diameter: Ć 32 Ć· 100 mm. Stroke length: from 50 to 800 mm. Operating pressure: from 0.4 to 10 bar. Sealing: NBR, polyurethane. Operating temperature: from -10Ā°C to +80Ā°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe CMPC series compact actuator, with an internally threaded piston rod, is characterized by its lightweight and short design, allowing for installation in hard-to-reach places. The special profile of the actuator is connected to the outer covers using screws, ensuring optimal axial stiffness and increasing the variety of mounting options. Depending on the version, it may or may not be equipped with a magnet embedded in the piston, and grooves in the profile allow for the use of magnetic sensors without additional equipment. Manufactured according to ISO 15552 standard. This standard allows for easy and quick selection and replacement of the actuator during machine maintenance work. Piston diameter: Ć 32 Ć· Ć 100. Actuator type: double-acting, double-acting with a through piston rod, and single-acting with a retracted piston rod. Piston rod material: C45 chrome-plated steel or stainless steel. Maximum operating pressure: up to 10 bar. Operating temperature: from -10Ā°C to +80Ā°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSingle-acting actuator ISO 15552 type A, features a cover made of high-pressure aluminum casting and a profile made of calibrated anodized aluminum, which includes longitudinal grooves on three walls allowing for direct mounting and protection of the piston position sensors. The same grooves are used for direct mounting of valves and other mechanical components. Piston diameter: Ć 32 Ć· 63 mm. Stroke length: from 30 to 200 mm. Operating pressure: from 0.4 to 10 bar. Sealing: polyurethane. Operating temperature: from -10Ā°C to +80Ā°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble-acting short-stroke actuator with rotation protection using a magnet. The SSCY series is characterized by a compact design and is intended for installation in confined spaces. The operational lifespan of actuators without transverse load with NBR seals is 15 million cycles, and with polyurethane seals, it is 30 million cycles. Due to the variability of many factors affecting lifespan, the presented values should not be considered binding or guaranteed, but only as a reference. Available piston diameters: Ć 12 Ć· 80 mm. Working stroke: from 10 to 80 mm. Seal material of the actuator: NBR, polyurethane. Operating pressure: from 0.4 to 10 bar - depending on the piston diameter. Operating temperature: from -10Ā°C to +80Ā°C - depending on the type of seal.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe CMPC series compact actuator, with an externally threaded piston rod, is characterized by its lightweight and short construction, allowing for installation in hard-to-reach places. The special profile of the actuator is connected to the outer covers using screws, ensuring optimal axial stiffness and increasing the variety of mounting options. Depending on the version, it may or may not be equipped with a magnet embedded in the piston, and grooves in the profile allow for the use of magnetic sensors without additional accessories. Manufactured according to the NFE 49-004-1 and 2 standards (UNITOP). This standard allows for easy and quick selection and replacement of the actuator during machine maintenance work. Selected actuators have a through hole in the piston rod. Piston diameter: Ć 32 Ć· Ć 100. Actuator type: single-acting and double-acting. Piston rod material: C45 chrome-plated steel or stainless steel. Minimum operating pressure: 0.4 Ć· 0.6 bar, depending on the diameter. Maximum operating pressure: up to 10 bar. Operating temperature: from -10Ā°C to +80Ā°C.
- Available on requestDouble-acting cylinder with a passing double rod can be used as an actuator in systems where protection against rotation is required. Axial dimensions compliant with ISO 15552 standard. Standard configuration with magnet and cushioning. Piston diameter: Ć 32, 40, 50, 63, 80, 100 mm. Maximum recommended stroke length: from 25 to 500 mm. Operating pressure: up to 10 bar. Sealing: polyurethane. Working medium: filtered compressed air, oiled or non-oiled. Forces generated at 6 bar extend/retract: Ć 32 - 434/350 N, Ć 40 - 678/597 N, Ć 50 - 1060/940 N, Ć 63 - 1683/1471 N, Ć 80 - 2714/2295 N, Ć 100 - 4241/3812 N. Operating temperature: from -10Ā°C to +80Ā°C.
- Available on requestExcellent lubricant for precision devices. Provides very good penetration, lubrication, dewatering, and corrosion protection. Used for: removing moisture and drying electrical equipment, loosening rusted screws and nuts, removing minor contaminants from metal parts. Does not contain silicones. Packaging - 500 ml.
- Available on requestSilicone grease SILICONE SPRAY does not contain petroleum-based substances and is resistant to elevated temperatures up to +176Ā°C. It protects components and does not leave stains. Packaging - 400 ml.
- Available on requestUniversal oil US-45 penetrating and lubricating, in a 500 ml spray. Can be used as a multifunctional product with lubricating, de-rusting, moisture-proofing, and protective properties (for all types of machines and equipment). Cleans, protects, and lubricates all types of metals and is safe for most rubber and plastic surfaces. Quick de-ruster ā ideal for disassembling corroded screws, nuts, pins, etc. It is a strongly penetrating agent, leaving a thin lubricating film after application. This product protects hoses, linkages, brake assemblies, gears, locks, tools, etc. US-45 is a low-viscosity lubricating agent, invaluable for penetrating and lubricating hard-to-reach places. It has excellent moisture-proofing properties and is safe to use on batteries, starters, ignition wires. Restores electrical contact to oxidized connections. Helps avoid starting problems and eliminates current leakage in automotive systems. The product cleans and protects matte metal surfaces. Removes dirt, soot, greases, tar, etc. US-45 contains no silicones or resins and does not build up with repeated use. Protects against rust and corrosion, guards against moisture. Gentle on rubber and plastics. Safe for use on batteries, starters, ignition wires. Operating temperature: from -25Ā°C to +50Ā°C. Packaging - 500 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease fitting (grease plug) compatible with NORDIC RANGE socket size 1/2", 3/4" or 1". It is equipped with a grease nipple through which grease should be supplied for maintenance purposes. Prevents corrosion of the locking mechanism in the socket (locking sleeve, spring, balls). Enables operation in conditions of heavy contamination and during winter, preventing the quick coupling from freezing.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA pneumatic lubricator is a simple and widely used solution that ensures proper lubrication with an oil mist for actuating devices in pneumatic systems. The oil suction process occurs due to the pressure drop created in the Venturi nozzle. The amount of oil droplets introduced into the air stream is regulated by an adjustment needle. There are auxiliary connections on the rear and front surfaces of the lubricator for connecting a manometer, pressure sensor, or for additional air intake. Size: SY1, SY2. Tank capacity: 60 cmĀ³ - SY1, 130 cmĀ³ - SY2. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: from -10Ā°C to +50Ā°C. Connection: BSP 1/8" to 3/8" for SY1 and BSP 3/8" to 1" for SY2. Flow rate: 1600 l/min - 1/8", 3000 l/min - 1/4", 3650 l/min - 3/8", 6100 l/min - 1/2", 3/4", 1" (at an inlet pressure of 6 bar Īp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCompressed air lubricator with polycarbonate tank, ensures proper lubrication of devices in pneumatic installations with oil mist. Size: DN6. Installation: vertical. Housing material: brass. Sealing: NBR. Tank capacity: 40 cmĀ³. Supply pressure: up to 16 bar. Operating temperature: from -10Ā°C to +50Ā°C. Connection: G 1/4" BSP. Flow rate: 1160 l/min (at inlet pressure 6 bar Īp = 1 bar). Weight: 400 g.
- Available on request
BANJO screw DIN 7643
All products | Hose fittings for measuring hosesFrom: 35 kr / m / pcs
Available on orderBanjo screw DIN 7643, size M8, M10, and 1/8" BSP. Material: carbon steel, galvanized. Material: steel with zinc-nickel coating. Working pressure: 200 bar. Operating temperature: from -30Ā°C to +120Ā°C. - Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO screw with O-ring and internal thread type D9 for couplings type R28, R29. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBanjo type Z, inch screw without washer. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble bolt for BANJO connection with a relief, intended for securing brake lines. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble bolt for BANJO connection, intended for securing brake lines. Material: anodized aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble bolt for BANJO connection, intended for securing brake lines. Material: carbon steel, chrome-plated.
