Our products
Product categories
Working pressure [bar]
Minimum operating temperature [Ā°C]
Maximum operating temperature [Ā°C]
Material
Vacuum resistance
Standard length [m]
- Available on request
IBC spout, polypropylene
All products | CAMLOCK couplings and IBC fittingsFrom: 40 kr / m / pcs
Available on orderIBC non-threaded outlet facilitates liquid discharge from the tank, available in black and white. A two-part cap/cover should be used for outlet installation. Material: polypropylene. Operating temperature: from -10Ā°C to +70Ā°C (temporarily up to +80Ā°C). 
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable throttle valve type FPMB used in hydraulic systems as a flow control element. Flow regulation is achieved through a rotating ring. Permissible flow direction: A ā A1, A1 ā A. Material: carbon steel, galvanized (body). Sealing: NBR. Operating temperature: from -20Ā°C to +90Ā°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal three-piece ball valve with full bore and lever lock type 2013N, intended for industrial installations. It can be used for air, gases, water, steam, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED directive 2014/68/EU. Body material: stainless steel CF8M. Ball material: stainless steel CF8M. Lever material: steel AISI 304. Ball sealing: PTFE / RTFE. Stem sealing: PTFE. Connection: BSP thread. Operating temperature: from -20Ā°C to +200Ā°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal manual control distribution valve with actuator assistance for panel control. Most commonly used for controlling actuator operation. An MW-035100005 adapter is always required during installation. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10Ā°C to +60Ā°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary connector for automatic drum rewinder SR. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsR-G type BANJO adapter with external metric or BSP thread, 60Ā° cone sealing. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing adapter with internal BSP threads and external BSPT threads for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300Ā°C. Working pressure: 25 bar (up to +120Ā°C), 20 bar (up to +300Ā°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRS reducing adaptor with internal and external BSP, NPT threads, designed for connecting pipes (hoses with fittings) and components of industrial installations with working pressures up to several dozen bar. Used for all types of media: water, air, chemical substances, petrochemical products. Depending on the size and manufacturer, the fittings have various shapes of flange for a wrench. Material: brass. Sealing: flat gasket (polyurethane) - GW BSP.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic drum hose reel for cold and hot water, oil, lubricants, and other media. The retractable spring tested for 25,000 winding and unwinding cycles. Compliant with ATEX directive 94/9 IIB 2GD c T4 T135C X. Includes hose bumper. The drum is not equipped with a hose, which must be ordered separately. Rotating suspension or additional fixed suspension for quick disassembly (e.g., in winter) ordered separately. Advantages: rotating connection made of AISI 304 steel, viton sealing. Drum material: powder-coated carbon steel. Sealing: viton. Operating temperature: up to +130Ā°C (without hose).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, very soft, extremely flexible and elastic hose characterized by high resistance to bending and lack of shape memory. Designed for air, water, and light chemicals. Maintains flexibility at low temperatures. Outer layer resistant to abrasion. Resistant to UV radiation and weather conditions. Hose material free from cadmium and silicone, complies with RoHS requirements. Roll length: 100 m. Inner layer: yellow (Y) or blue (BL) PVC. Reinforcement: polyester braid. Outer layer: yellow (Y) or blue (BL) PVC. Working pressure at 20Ā°C: 20 bar. As the operating temperature increases, the working pressure value of the hose decreases. Operating temperature: from -25Ā°C to +60Ā°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details22 mm coil UL and CSA for PIV.I valves, shaft O8. Insulation class: F155. Voltage tolerance: -10% to +15%. Protection degree: IP65 EN60529 with connector.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFour-way coupling with internal BSP threads type A14 intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers are required. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExtended straight nozzle, designed for hard-to-reach areas; installation directly to the gun body. Nozzle length: 300 or 500 mm. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket with valve for hose is intended for gas detection, medical devices, chemical analyzers, inkjet printing, as equipment for optical devices, etc. The characteristic design (not containing balls and protective sleeves) allows for easier, secure connection and disconnection with one hand. The effectiveness of the connection is indicated by an audible click. Length L [mm] - total length. Material: acetal. Sealing: NBR. Working pressure: up to 8.3 bar. Operating temperature: from -40Ā°C to +82Ā°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsKCS quick coupling socket without valve with external BSP thread for lances, guns, and cleaning devices. Material: brass, stainless steel. Working pressure: 350 bar. Operating temperature: +160Ā°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK DU connector socket with internal BSP thread (flat PTFE gasket) made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: AISI 316 steel. Levers: AISI 304 steel. Sealing: NBR.
- Available on requestDesigned for use in hot water, cooling water, and hot air installations. Not suitable for mineral oils, cooling water with anti-corrosive agents containing oil, or oil-laden air. Marked on the double sleeve with a red stripe. Inner layer: EPDM rubber. Reinforcement: polymer cord. Outer layer: EPDM rubber. Flanges: galvanized carbon steel. Operating temperature: from -40Ā°C to +130Ā°C (temporarily +150Ā°C depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose end with external BSP thread intended for cold and hot water. Material: brass. Working pressure: 16 bar.
- Available on request
Foam lance with nozzle, plug DN11.8, stainless steel
All products | Foam- washing- and dosing devicesFrom: 883 kr / m / pcs
Available on orderFoam lance with nozzle (nozzle type AK-NOZ50200 - 65Ā°) in a white nylon cover for AKBO gun. Connection: (inlet) DN11.8 plug. Available lengths: 22 cm, 50 cm, and 60 cm. Material: stainless steel, nylon (nozzle cover). - Select options This product has multiple variants. The options may be chosen on the product page / DetailsKN chain for TW connections (tank truck). Material: brass.
- Available on requestVery strong and durable high-quality flat hose designed for trouble-free and maintenance-free operation in harsh field conditions. Used particularly for water, sludge, sewage, and other liquids. Made from hydrolysis and microbe-resistant polyurethane - polyether. Reinforced with a circumferentially woven polyester braid bonded and surrounded by polyurethane in the original hot thermoplastic polyurethane extrusion production process through braiding. The hose has high tensile strength, minimal elongation under pressure, and no tendency to kink or twist. Excellent abrasion and puncture resistance allows operation in heavy, uneven terrain and minimizes wear on the water-loaded hose during possible pressure pulsations. Due to its strength and durability combined with ease of handling (rewinding - unwinding), it is used in permanent and temporary high-pressure and high-efficiency water systems in the mining, energy, agriculture, and firefighting industries. Resistant to a wide range of chemicals, microbes, fungi, hydrolysis, weather conditions, UV, and ozone. To confirm the resistance and application conditions of the hose, contact Tubes International. Maximum working pressure for temporary use established according to a safety factor of 2:1 approved by the manufacturer (only for water and safe, non-flammable liquids). For maximum longevity, it is not recommended to exceed 1/3 of the bursting pressure. Standard roll length: 200 m. Hose material: black polyurethane - polyether (PU). Working pressure: from 15 bar to 21 bar - depending on the hose diameter and temperature. Operating temperature: from -50Ā°C to +75Ā°C (water).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShort coupling with internal BSP thread for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLocking nut designed for mounting FPB or FPU type valves. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSealant thread made of 100% PTFE. Permanently and safely seals most threaded pipe connections made of metals and plastics. The thread is non-flammable and has exceptional chemical resistance. It guarantees sealing stability when unscrewing up to 45Ā°. Operating temperature: -200Ā°C to +240Ā°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-freezing high-pressure water gun AURA for industrial applications. Suitable for hot and cold water. The lever mechanism does not require the operator to exert significant force, resulting in comfortable and pleasant operation. The outlet part is finished with a 1/4" BSP internal thread. The gun is available in versions with a fixed or rotating connection to the installation. Housing material: high-strength plastic. Working pressure: up to 180 bar. Maximum pressure: 210 bar. Flow rate: 30 l/min. Operating temperature: up to +160Ā°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 3015 heavy clamp type 201 (with top plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. In addition to standard metal components, extended plates, rails, and screws for mounting clamp sets can be ordered. Selection of components should be consulted with TUBES INTERNATIONALĀ®. Clamp material: self-extinguishing polyamide. Screw material: galvanized steel. Plate material: galvanized steel. Base material: carbon steel. Operating temperature: from -40Ā°C to +180Ā°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand clamp with a worm drive equipped with a spring for compensating dimensional changes in the connection (shrinkage of the hose due to cold flow of the material or due to large temperature variations). The spring consists of a set of 8 disc springs (washer springs) ā washers under the head of the screw. This ensures the maintenance of the clamp's grip and tightness around the entire circumference of the hose, preventing leaks from the installation. The spring mechanism of the clamp allows for automatic adjustment of its diameter while maintaining the clamp's grip. Particularly recommended in cases of large temperature changes. Proper clamping of the clamp is indicated by the screw end protruding beyond the housing of the lock and the flattened disc springs. The internal insert of the clamp protects the hose surface from damage. Installation tightening torque 5.6 Nm (max. 9.6 Nm). Material of the screw/lock: galvanized carbon steel. Material of the band: stainless steel 300. Band width: 14.3 mm (9/16").
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGun grip cover NiTO HEAVY DUTY. Material: perbunan (NBR).
- Available on requestGear displacement pump (hydraulic), TRALE, with external gearing, intended for use in hydraulic systems of machines and equipment. Connections: flanged. Direction of rotation: left. The stated maximum operating pressure applies to continuous operation. Material: body and mounting plate ā aluminum, rear cover ā aluminum. Sealing: NBR. Medium: hydraulic oil type L-HM45 or equivalent. Liquid viscosity: from 10 cSt to 600 cSt (recommended 30 Ć· 45). Operating temperature: from -20Ā°C to +90Ā°C (medium), from -20Ā°C to +60Ā°C (environment).
- Available on requestSAE 3000 flange connection with a compact design featuring a 24Ā° DIN 2353 socket for metric tubing, intended for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Available as: L (light series), S (heavy series). Material: carbon steel, galvanized. Operating temperature: from -20Ā°C to +100Ā°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details
Cleaning agent DL-44
All products | Cleaning agents, maintenance products, assembly compounds, and protective coatingsFrom: 454 kr / m / pcsCitrus cleaner DL-44 in spray. Made from citrus oils, neutral pH. Removes stickers and labels, tar, greases, fats, printing ink, oils, and most contact adhesives. Effectively removes fresh polyurethane foam. Contains no corrosive agents, is gentle in action with a neutral pH, making it suitable for use on glass, metal, laminates, ceramics, painted surfaces, rubber, and wood. Capacity: 400 ml. - Available on requestDevice intended for marking clamp sleeves up to 2" in size. Standardly equipped with a single-line holder that can accommodate up to 16 characters with a height of 3 mm. Drive: manual. Weight: 26 kg. Accessories ordered separately.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMulti-spiral hydraulic hose for high pressure. Hose with increased flexibility (bending radius 50% better than standard norm). Hose lifespan confirmed by a test of 500,000 impulse cycles. Outer layer flame-resistant (MSHA). Used in hydraulic power systems of large construction machinery and all types of hydraulic-driven equipment. Standards: EN 856 R15, SAE 100 R15, ISO 3862-1 R15. Inner layer: black synthetic rubber. Reinforcement: four layers of spiral steel wire. Outer layer: black synthetic rubber. Working pressure: 420 bar. Operating temperature: from -40Ā°C to +120Ā°C (hydraulic oil).
- Available on request
Meta-aramid reinforced silicone hose, ML, blue
All products | Automotive hoses and hose connectorsFrom: 240 kr / m / pcs
Available on orderSilicone hose reinforced with meta-aramid is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, a version made of fluorocarbon rubber is recommended. Standard length: 1000 mm (also available in lengths of 2000 mm and 3000 mm). Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Outer layer color: blue. Material: silicone rubber. Reinforcement: meta-aramid layers. Working pressure: from 1 bar to 8.75 bar (depending on hose diameter). Operating temperature: from -50Ā°C to +230Ā°C. - Available on requestColorless, glassy transparent, flexible hose free of phthalates and BPA (Bisphenol A). Designed for the transfer and dispensing of food products, particularly juices, beverages, and bottled water. Does not alter the taste and smell of products, and its non-wetting properties allow for complete drainage and easy cleaning by rinsing. Can be used with peristaltic pumps, but the lifespan is moderate. Meets hygiene and food contact requirements: European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), American FDA, NSF-51, NSF61, 3-A, Japanese #370/1959 and MHLW370(3-D). Sterilization by steam or ethylene oxide is possible. Compliant with REACH and California Proposition 65 ā does not contain hazardous and prohibited substances. Full hose roll length is 15 m (from internal diameter 50.8 mm - 6 m). The specified working pressure is relative to the burst pressure with a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: +74Ā°C. Brittleness temperature: -36Ā°C. Hardness: 66Ā° Shore (A). Density: 1.21 g/cmĀ³. Note: Product packaged in the Clean Zone of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Available on requestISO bracket for mounting with a swivel flange. Included: 4 screws with washers. Material: cast aluminum (flange), galvanized carbon steel (screws and washers).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBauer lever connector plug with "tail" for hose with wide applications including in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: carbon steel, galvanized. Working pressure: 20 bar (up to size 89 mm), 12 bar (for sizes above 89 mm). Operating temperature: from -20Ā°C to +50Ā°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsORFS plug with external UNF thread, type ROV. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for CEJN 232 quick coupling with internal NPT thread. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF NMC series COMPACT "N" for direct mounting in actuator connections, used in pneumatic systems for regulating the flow rate of compressed air and the direction of flow. Equipped with a plug-in coupling for easy disassembly of pneumatic hoses. Adjustment change via a control knob and/or screwdriver; possibility of securing the setting with a locking nut. Size: M5, 1/8ā³, 1/4ā³, 3/8ā³, 1/2ā³. Working pressure: up to 10 bar. Operating temperature: from -10Ā°C to +70Ā°C. Material: nickel-plated brass.
